Contact Us
- Henan Changyuan Lifting Industrial Park, Changyuan, Xinxiang, China
- sales@jingucranebrake.com
- +8615516609555
-
09/Oct
2026
FAQ for ED Series Electro-Hydraulic Thrusters
Q1: What is an ED Electro-Hydraulic Thruster used for? A: It is a fail-safe actuator for drum and disc brakes (e.g., YWZ, YWZ5, YWZ9, YWL series). When energized, it pushes the bra
-
23/Sep
2026
How to check brakes on a crane?
General Safety Rules Before Checking Stop, isolate, and verify before touching the brake. A crane brake may engage or release suddenly.Before opening any enclosure or touching a br
-
21/Sep
2026
What Is Gantry And Overhead Crane Brake System?
Gantry And Overhead Crane Brake System Overview A gantry and overhead crane brake system is a group of safety devices used to slow down, stop, hold, and-when necessary-emergency-st
-
12/Sep
2026
Windproof Rail Wedge Brake: The Essential Safety Device for Outdoor Rail-Moun...
What Is a Windproof Rail Wedge Brake? A Windproof Rail Wedge Brake (also known as an electro-hydraulic rail wedge, torm brake, or rail clamp) is a fail-safe parking and anti-wind d
-
10/Sep
2026
How is the pusher stroke H1 of the electric-hydraulic brake measured and adju...
How to measure H1 Power-off brake status measurement (reference value) Disconnect the power supply of the pusher, activate the spring brake, and fully retract the push rod. Use a s
-
07/Sep
2026
What are the performance differences between the ED series electric hydraulic...
The ED series is an upgraded replacement for the YT1, with both operating on the same principle (electrically powered oil injection to raise the push rod and release the brake, spr
-
02/Sep
2026
Hydraulic wheel hub brake
The hydraulic wheel hub brake is a specialized safety component that achieves braking through hydraulic drive. It is widely used in outdoor heavy equipment such as port cranes, min
-
29/Aug
2026
QP Series Pneumatic Drill Disc Brake
The QP series pneumatic clamp disc brake is a type of normally closed industrial brake that uses spring braking and pneumatic release. It is widely used in parking braking, emergen
-
11/Aug
2026
What are the common misconceptions about the YT1 electric hydraulic actuator?
common misconceptions 01. Misunderstanding in Model Selection It is believed that YT1 and ED/YTD can be directly interchanged: YT1 is an old cast iron shell, with different install
-
16/Jul
2026
Common FAQs About Drum Brakes for Industrial Winches
FAQ Q: Should drum brakes be set to normally open or normally closed? A: The hoisting mechanism of an industrial winch must be designed with a fail-safe (normally closed) configura
-
03/Jul
2026
ST10SH Safety Brake
The ST10SH safety brake is a hydraulic fail-safe disc brake. It is primarily used for high-power braking on low-speed shafts (such as drum shafts), and can automatically engage rap
-
23/Jun
2026
Replacement of friction plates for pneumatic wrench disc brake
To determine whether the friction pads of the QP series pneumatic disc brake need replacement, a comprehensive assessment should be made based on three factors: physically measurin