+86-373-8729999
Electric Hydraulic Brake Actuator

Electric Hydraulic Brake Actuator

Product Overview ED series electro-hydraulic thrusters are specialized driving devices for brakes. They are mainly used with drum brakes and disc brakes in cranes, conveyors, metallurgical equipment, mining machinery, port machinery and other industrial equipment. When energized, the thruster...

Description

Product Overview

ed-Electro-Hydraulic Thruster

ED series electro-hydraulic thrusters are specialized driving devices for brakes. They are mainly used with drum brakes and disc brakes in cranes, conveyors, metallurgical equipment, mining machinery, port machinery and other industrial equipment.

When energized, the thruster extends its piston rod quickly to release the brake. When de-energized, the return spring retracts the piston rod immediately to apply the brake. This provides reliable braking and safety protection.

The product features a compact structure, smooth operation, stable thrust, low noise and easy maintenance. It is available in standard, flameproof and low-temperature versions to suit different working conditions.

2. Working Principle

When energized, the electric motor drives the impeller at high speed.

Hydraulic oil enters the cylinder under centrifugal force.

The oil pressure pushes the piston and piston rod upward.

The piston rod actuates the brake linkage to release the brake.

When de-energized, the return spring retracts the piston rod quickly.

The brake is applied to stop or hold the equipment.

 

3. Product Features

Wide thrust range: rated thrust from 220 N to 3000 N.

Stable performance: smooth movement and reliable thrust output.

Reliable protection: sealed structure for dusty and humid conditions.

Quick reset: the spring returns the piston rod rapidly after power failure.

Easy installation: compact design and simple maintenance.

Multiple options: different thrust and stroke combinations are available.

Flexible application: suitable for drum brakes and disc brakes.

 

4. Main Parameters

Model

Rated Thrust

Stroke

Power Supply

ED23/5

220 N

50 mm

3-phase, 380V, 50Hz

ED50/6

500 N

60 mm

3-phase, 380V, 50Hz

ED80/6

800 N

60 mm

3-phase, 380V, 50Hz

ED121/6

1250 N

60 mm

3-phase, 380V, 50Hz

ED201/6

2000 N

60 mm

3-phase, 380V, 50Hz

ED301/6

3000 N

60 mm

3-phase, 380V, 50Hz

The above data are for reference only. The actual parameters, power supply and mounting dimensions shall be subject to the product nameplate and order confirmation.

 

5. Selection Guide

Determine thrust: the rated thrust should not be less than the force required to release the brake.

Determine stroke: the available stroke must meet the actual movement requirement of the brake.

Check mounting: confirm mounting hole distance, mounting height, piston rod direction and base angle.

Check power supply: confirm rated voltage, frequency and wiring method.

Check duty cycle: confirm the operating frequency for high-cycle applications.

Check working conditions: select low-temperature, corrosion-resistant or flameproof types for special environments.

 

6. Applications

ED series thrusters are suitable for:

overhead cranes and gantry cranes;

belt conveyors;

winches and hoisting equipment;

metallurgical machinery;

mining machinery;

port handling equipment;

other industrial equipment requiring brake control.

ED Electric Hydraulic Thruster

 

 

7. Installation and Maintenance

Before installation, check the product appearance, nameplate, oil level and accessories.

Install the thruster in the specified direction.

The piston rod must not be subjected to side force.

Regularly check the oil level, seals and mounting bolts.

Repair any oil leakage in time and use only the specified hydraulic oil.

If the oil level is low, stop the equipment and disconnect the power supply before inspection.

Refill with the correct hydraulic oil and bleed the air according to the instruction manual.

After refilling, check the piston rod stroke and return action.

Do not operate the equipment if movement is abnormal.

For hazardous areas, use a certified flameproof thruster.

Do not open the flameproof enclosure or modify the thruster while it is energized.

Hot Tags: electric hydraulic brake actuator, China, manufacturers, suppliers, factory, Ed 50 6 Electro hydraulic Thruster, Ed Series Electro Hydraulic Thruster, Electric Hydraulic Pusher for brake, Electro Hydraulic Thruster Brake With O Ring, vane hydraulic motor, vane pump for hydraulic thruster

Send Inquiry

(0/10)

clearall