Port Terminal Brake YLBZ

 

 

MAIN FEATURE

• Disc spring hydraulic cylinder has excellent performance and is designed, produced and manufactured in strict accordance with GB/T15622-2005.
• Normally closed design, the hydraulic station drives the disc spring to release, which is safe and reliable.
• The action of the brake pad adopts the connecting rod structure to ensure that the clearance between the friction plate plane and the wheel end face is equal when the brake is released. Eliminate the phenomenon that the friction plate is attached to the brake wheel in the previous brake release state.
• Anti-corrosion design.All fasteners and spindles are made of stainless steel, with good anti-corrosion performance.

 OPERATING CONDITION

• Ambient temperature:-20℃~+50℃
• Working pressure: 8Mpa
• Voltages: AC 3 phase 380V 50Hz
• Outdoor rain and snow erosion or corrosive gases and media shall be anticorrosion products.
• Special requirements can be discussed before production.

 

• For example:if the rated clamping force is 50KN and the wheel width is 160,the order mark is YLBZ25-160-left; The right type assembly                       is YLBZ25-160-right.

 

Outline And Installation Dimension

 

Note: the picture: S=75+D1/2(for YLBZ25,YLBZ40 specification);

          S=85+D1/2(for YLBZ63,YLBZ100 specification);

          D-contour outside diameter  a-Wheel clamp mounting Angle can be any value.

 

Technical Data And Dimensions of YLBZ Series Hydraulic Wheel Port terminal industrial brake

Brake type	Rated clamping force	Rated power	Dimensions (mm)							Weight(kg)
			B	K	J	H	D	G	d
YLBZ 25-160	50	42	160	300	250	310	190	500	20	145
YLBZ 40-150	73	63	150	300	250	325	190	500	20	150
YLBZ 40-160			160
YLBZ 40-180			180
YLBZ 40-200			200
YLBZ 63-180	114	96	180	300	250	325	200	510	24	155
YLBZ 63-200			200
YLBZ 63-210			210
YLBZ 100-200	180	150	200	360	280	350	225	560	24	160

Note:Please contact our technical department,when wheel width B isn't within the range specified in above table.

The size of the specific type and structure should be retained.

 

FAQ:

1. Are you a manufacturer, trading company or a third party?

We are a manufacturer, and we have builded up our company since 2004.

 

2. Where is your factory located?

Our factory address is : Weizhuang industrial Park Changyuan County Xinxiang City, Henan Province, China.

 

3. How can i get to your factory?

Our factory is near zhengzhou Airport, we can pick you up in the airport.

 

4. If i will need to stay in your place for few days, is that possible to book the hotel for me?

It's always my pleasure, hotel booking service is available.

 

5. What is your minimum order quantity, can you send me samples?

Our minimum quantity is 1 set, as our product is machinery equipment, it's difficult to send you samples, however,we can send you catalog, warmly welcome you to come visit our company.

 

6. Which level of quality are your products?

We have got ISO9001, ISO14001, OHSAS18001, TX, EX, MA etc certificate so far.

 

7. What is the delivery time of your machine?

In general, the delivery time of our machine is about 7 days, customized machine will be delivered as the negotiation with our clients.

 

8. Can the machine be customized as our need, such as put on our logo?

Surely our machine can be customized as your need, Put on your logo is also available.

 

9. As the shipping period will take long time, how can you make sure the machine won't be broken?

Our machine is film wrapped, to make sure the machine can be delivered to our customer smoothly, we will use the steel wire to fix the machine with the container.,

 

10. May i know which payment will be accepted by your company?

So far 100%T/T before shipment, and 30% deposit paid by T/T, balance paid by L/C are available.

 

11. About the after-sale service, how can you solve the problems occurred of your overseas customer in time?

The warranty of our machine is normally 12 months, during this period, we will arrange the international express immediately, to make sure the replace parts to be delivered as soon as possible.

 

12. After we placing an order, will you arrange the installation of the machine at present?

All the machines will be tested well before delivered, so almost of them can be used directly, also our machine are easy to be installed, if you customer needs our assistance, we will be pleased to arrange the installation, but all the cost will be be charged by you.

 

13. How can i get the after-service?

A: We will send you the spare parts by free if the problems caused by us.

If it is the men-made problems,we also send the spare parts,however it is charged. Any problem, you can call us directly.

 

14.How can i trust your company?

A:With 20-years-professional design, we can provide you suitable suggestion and lowest price

1. Assessed by third party, national patents and ISO for all equipment, .

2. For our machine, we do very well on belt transport,port handling,hoisting, metallurgical, mining and building machinery..

 

15.Is your price competitive?

A: Only good quality machine we supply. Surely we will give you best factory price based on

superior product and service.

 

    We attach great importance to technological innovation, and we have a large number of advanced technological achievements and products in the Construction Hoist Elevator Safety Brake industry. We take the market as the guidance, science and technology as the driving force, striving to provide the best products and services to customers. Allow us to move ahead hand in hand and attain win-win situation.

Hot Tags: port terminal brake ylbz, China, manufacturers, suppliers, factory, airport brake, cold weather brake, corrosive environment brake, logging truck brake, pickup truck brake, sedan brake