CQP Pneumatic Caliper Brakes

Standards compliant:

The technical requirements for caliper disc brakes conform to the JB/T10917-2008 standard.

Main Feature:

▲ The CQP series is a normally open design: air brake, spring release, the braking force can be changed with the change of air pressure, and can be flexibly changed according to needs when using;

▲ Compact structure, small size, sensitive action, light weight, easy to use;

▲ Card-mounted non-asbestos brake pads are green and environmentally friendly, and are easy and fast to replace;

▲ Installation method: suitable for horizontal axis or vertical axis braking method. In the horizontal axis braking mode, it can be installed at any angle around the brake disc, and it is recommended to install it horizontally; in the vertical axis braking mode, the angle is not limited. One brake disc can be installed with one brake, or two or more brakes can be installed, but it is recommended to install two or more brakes symmetrically as much as possible;

▲ All power sources do not need to be set separately, and can be used in connection with the existing air compressor station. A speed control valve is installed in the air supply line, and the braking time can be adjusted steplessly.

Working conditions:

◆ Ambient temperature: -20°C~+40°C;

◆ Working pressure: 7 bar;

◆ Air source requirements: the compressed air entering the air bag should be dry and clean, and should not contain corrosive gases;

◆ If there are special requirements, it will be negotiated when ordering.

Basic parameters:

● Product model: CQP

● Applicable disc diameter: ØD≥200mm

Hot Tags: cqp pneumatic caliper brakes, China, manufacturers, suppliers, factory, semi automatic pneumatic drum brakes, fishing boat pneumatic drum brakes, asphalt production pneumatic drum brakes, harvester pneumatic drum brakes, copper industry pneumatic drum brakes, road construction pneumatic drum brakes