Crane Thruster Brake System

Product introduction:

Low-speed brakes for hoist crane brakes applications are specified according to full motor torque plus a service factor. In the USA this is called out in AISE standards. The low-speed brakes are either used as dynamic stopping or static holding brakes, depending on whether there is a VFD controlling the motor as a primary brake.

There are several variables that are involved when specifying these brakes such as:

1.Environmental Factors (i.e. ambient temperature, dust/grime, saltwater exposure, etc.)

2.Required torque

3.Friction coefficient

4.Duty Cycle

5.Controls Integration/PLC

Purchase tips:

Send your Inquiry Details in the Below, I will give an accurate quote within 12 hours:

1.Lifting Capacity is ____t

2.Span is____m

3.Lifting Height ____m

4.Working Conditions_____

5.Power source is____v,____hz, ____phase.

6.Your contact information. Both Email and phone number are essential.

Hot Tags: crane thruster brake system, China, manufacturers, suppliers, factory, Electric Hydraulic Drum Brake With Thruser, YWZ9 Series Electric Hydraulic Drum Brake, YW Series Electric Hydraulic Drum Brake, Port Machinery Drum Brakes, Electric Hydraulic Thruster Drum Brakes, Crane Brakes