Brakes are used very frequently and play a key role in different mechanical movements.
In order to ensure the stability of the component work, we need to use the daily, we need to regularly check, timely troubleshooting problems. What needs to be focused on the brakes when they are supervised?
Small editor on the focus of the inspection made a summary, I hope to help you.
1, check the degree of friction of the brake block or other brake block, to see if it needs to be replaced to the point;
2, brake components and brake wheel contact area, in general, the normal contact area should be less than 70%;
3, in the braking, whether the temperature is too high, although the brake is a part of the heat conversion, but also can not appear too high temperature situation;
4, according to the characteristics of the brakes, to see whether the anti-slip performance meets the requirements. Brake to mechanical energy can be to achieve the effect of braking, so in use, need to ensure the stability of the braking effect, there may be some equipment will frequently achieve braking and start, this time need to pay special attention to the brake elements, to prevent the lack of brake, causing some accidents.
