There are two types of brakes, hydraulic brakes and block brakes.
What should we pay attention to when using hydraulic brakes?
In order to ensure uninterrupted operation of the hydraulic brake, it must be protected and protected frequently:
1. Lubricants are often added to the movable electromagnetic brakes.
2. Check the length of the armature stroke regularly. Because during the operation of the brake, because of the wear of the profile, the stroke length of the armature will increase. When the armature stroke length does not reach the normal value, it is necessary to adjust to recover the minimum gap between the braking surface and the turntable. If the armature stroke length increases above the normal value, the suction power may be greatly reduced.
3. If the worn brake surface is replaced, the minimum clearance between the brake surface and the turntable should be adjusted properly from the beginning.
4. Always check the tightening of the bolts, especially the bolts of the electromagnet, the bolts of the electromagnet and the housing, the bolts of the yoke, the bolts of the solenoid coil and the connecting bolts.
5. Regularly check the mechanical wear of the moving parts, and remove the dust, flower hair and dirt on the surface of the electromagnet parts.
