Electric Hydraulic Brakes

Conditions of use:

Continuous work S1 continuous work S2, load duration rate FC=60%

Rated voltage is 380V three-phase, frequency is 50Hz

The elevation grade of the site conforms to the standard (gb755-87)

The ambient temperature shall be within the range of -20℃ ~ 40℃, and the relative humidity of the air shall be no more than 90%5.

Vertical mounting: piston connection block facing up, horizontal mounting: signage of marks facing up: (ed630/12 for vertical mounting)

Using range

Mainly used as the operating components of BYWZ4, BYWZ5, YWZ8, BYWZ9, YWZP series electric hydraulic block brake, widely used in lifting and transportation, metallurgy, mining, port, construction and other industries.

A brake is a device with the function of slowing down, stopping or maintaining a stop state of a moving part (or a moving machine).

A mechanical part that stops or decelerates a moving part of a machine.

Commonly known as the brake, brake.

Brake is mainly composed of frame, brake parts and control device.

Some brakes are also fitted with automatic adjusting devices for brake clearance.

In order to reduce the brake torque and the size of the structure, the brake is usually installed on the high-speed shaft of the equipment, but the large equipment with higher safety requirements (such as mine hoist, elevator, etc.) should be installed on the low-speed shaft near the working part of the equipment.

Packaging & Shipping

Hot Tags: electric hydraulic brakes, China, manufacturers, suppliers, factory, Electro Magnetic Thruster Operated Drum Brake, Electronic Hydraulic Brake, directional control valves for drum brakes, proportional control of drum brakes, Hydraulic Press Brake, Electro Hydraulic Brakes For Gantry Crane